FLAT PANEL DETECTOR

For Digital Radiography

Flat Panel detectors

Flat-panel detectors are a class of solid-state x-ray digital radiography devices. They are used in both projectional radiography and as an alternative to x-ray image intensifiers (IIs) in fluoroscopy equipment. They contain a layer of scintillator material, typically either gadolinium oxysulfide or cesium iodide, which converts the x-rays into the light. Directly behind the scintillator layer is an amorphous silicon detector array manufactured using a process very similar to that used to make LCD televisions and computer monitors. Like a TFT-LCD display, millions of roughly 0.2 mm pixels each containing a thin-film transistor form a grid-patterned in amorphous silicon on the glass substrate. Unlike an LCD, but similar to a digital camera's image sensor chip, each pixel also contains a photodiode that generates an electrical signal in proportion to the light produced by the portion of the scintillator layer in front of the pixel. The signals from the photodiodes are amplified and encoded by additional electronics positioned at the edges or behind the sensor array in order to produce an accurate and sensitive digital representation of the x-ray image. Flat-panel detectors are more sensitive and faster than film. Their sensitivity allows a lower dose of radiation for a given picture quality than film. Being one of top solution providers in the world, we deliver an user-oriented product which equips high-quality image, lightweight, dual battery and innovative wifi antenna to enhance work efficiency.

Being one of top solution providers in the world, we deliver an user-oriented product which equips high-quality image, lightweight, dual battery and innovative wifi antenna to enhance work efficiency.

Transfer in a flash

With specialized antenna design, our product can achieve fast transfer and receive strong signal at anytime and anywhere. In the meantime, built-in wireless communication supports IEEE 802.11ac enabling a state-of-the-art transfer speed. Furthermore, we can be very proud to announce that the full image can be received within 2 seconds, achieving one of the fastest in the world

Smart design for Hot swap and seizing image in time

User can freely exchange battery at any time without stopping, shutting down or any power supply connect to the system. Moreover, our product ensures that the last image is kept in device before shutting down, in case of accidents

Featherweight design

In order to enhance the mobility, the whole device weighs only 2.7kg (1417) / 3.2kg (1717) including battery, making it effortless to carry around.

Easy cleaning

The detector is IPX6-rated for water resistant, allowing user to clean it easily.

Self management and monitoring

Since our detector has built in sensors including temperature and gravity, which are constantly monitoring even during panel in powered off state to make sure the panel is functioning properly and user can operate safely

Remarkable long-lasting feature

With our powerful battery lasting over 8 hours while capturing more than 1000 images at every 30 seconds sequentially without any interruption.

Access point mode

Equipped with access point function, our product can connect to computer without extra wireless configuration setting. It undoubtedly brings a user-friendly interface to improving work efficiency..

Overview

Specification
dimension (ISO 4090)
460 x 460 x 15 mm
Sensor array
a-Si photodiode
Scintillator
Csl / GOS
Resolution
3072 x 3072
Pixel size
140 um
Grayscale
16 bit
Wifi
802.11ac / 2 antennas / 2s scan to display / AP mode
Drop height
70 cm
Houisng materail
Mg-Al alloy
Weight(battery included)
3.2 kg
Waterproof
IPX6
Durability(Face load / Point load)
300 / 120 kg
Battery autonomy
8 hours*
Trigger mode
AED mode